|Nominal length||550 mm|
|Inner Diameter||68 mm|
|Inner Diameter||62 / 55,50 / 50 / 43 / 38,50 / 34 mm|
|Depth||145 / 160 / 175 / 215 / 270 / 325 mm|
|Affliction *||2,50 kN|
|Inner diameter||62 mm|
Areas of application
- Continuous welded helices
- Coating: Hot-dip galvanised according to DIN EN ISO 1461
- Patented conical body hammered from a length of pipe
The specified values for the possible external load-bearing capacity were determined for soil: loam, semi-solid (TL; TM). The information is only given for a first selection of possible screw foundation types in the design level. The basis for a final foundation design are load tests on site as well as a static verification of the internal load-bearing capacity of the KRINNER screw foundations. The Construction Products Act, the Construction Products Regulation, other regulations of the EC and the respective state building regulations must be taken into account.
The G-series ground screws are equipped with either one, three or four threaded screws. They are ideally suited for the quick, vertical and permanent installation of masts and fence posts, for example. Optionally, the fence posts, for example, can also be quickly and permanently fixed into place with the special granulate.